Thermo Mechanical Processing of Metallic Materials

• Author : Bert Verlinden,Julian Driver,Indradev Samajdar,Roger D. Doherty
• Publisher : Elsevier
• Release : 07 June 2007

Thermo-Mechanical Processing of Metallic Materials describes the science and technology behind modern thermo-mechanical processing (TMP), including detailed descriptions of successful examples of its application in the industry. This graduate-level introductory resource aims to fill the gap between two scientific approaches and illustrate their successful linkage by the use of suitable modern case studies. The book is divided into three key sections focusing on the basics of metallic materials processing. The first section covers the microstructural science base of the subject,

• Author : Bevis Hutchinson
• Publisher : ASM International(OH)
• Release : 30 May 1997

• Author : Andrea Bachmaier,Thierry Grosdidier,Yulia Ivanisenko
• Publisher : MDPI
• Release : 11 February 2021

Severe plastic deformation (SPD) is a very attractive research field for metallic materials because it provides new possibilities for manufacturing nanostructured materials in large quantities and allows microstructural design on different hierarchical levels. The papers included in this issue address the following topics: novel SPD processes as well as recent advancements in established processing methods, microstructure evolution and grain refinement in single- and multi-phase alloys as well as composites, strategies to enhance the microstructure stability at elevated temperatures, mechanically driven

• Author : Imao Tamura,Hiroshi Sekine,Tomo Tanaka
• Publisher : Butterworth-Heinemann
• Release : 22 October 2013

Thermomechanical Processing of High-Strength Low-Alloy Steels considers some advanced techniques and metallurgical bases for controlled-rolling. This book contains 12 chapters. In Chapter 1, the purpose of thermomechanical processing and historical survey is described, while in Chapter 2, the kinetics of phase transformations and refinement of grain size in steels are elaborated. The techniques and metallurgical bases for controlled-rolling in the recrystallization, non-recrystallization, and (? + y) regions are reviewed in Chapters 3 to 5. Chapters 6 and 7 discuss the deformation resistance during hot-rolling and restoration processes. The phase

• Author : Anonim
• Publisher : Unknown
• Release : 30 May 1987

• Author : Claudio R. Boer,Nuno M.R.S. Rebelo,Hans A.B. Rydstad,Günther Schröder
• Publisher : Springer
• Release : 15 December 2011

It is the objective of the series IIMaterials Research and Engineeringll to publish information on technical facts and pro cesses together with specific scientific models and theories. Fundamental considerations assist in the recognition of the origin of properties and the roots of processes. By providing a higher level of understanding, such considerations form the basis for further improving the quality of both traditional and future engineering materials, as well as the efficiency of industrial operations. In a more general sense,

• Author : Jose M. Rodriguez-Ibabe,Pello Uranga
• Publisher : MDPI
• Release : 18 November 2020

This book gathers a collection of papers summarizing some of the latest developments in the thermomechanical processing of steels. The replacement of conventional rolling plus post-rolling heat treatments by integrated controlled forming and cooling strategies implies important reductions in energy consumption, increases in productivity and more compact facilities in the steel industry. The metallurgical challenges that this integration implies, though, are relevant and impressive developments that have been achieved over the last 40 years. The frequency of the development of new

• Author : Andrew John McLaren
• Publisher : Unknown
• Release : 30 May 1994

• Author : Radim Kocich,Lenka Kuncická
• Publisher : MDPI
• Release : 24 February 2021

The demands on innovative materials given by the ever-increasing requirements of contemporary industry require the use of high-performance engineering materials. The properties of materials and alloys are a result of their structures, which can primarily be affected by the preparation/production process. However, the production of materials featuring high levels of the required properties without the necessity to use costly alloying elements or time- and money-demanding heat treatment technologies typically used to enhance the mechanical properties of metallic materials (especially

• Author : Jurij J Sidor
• Publisher : Mdpi AG
• Release : 15 November 2021

In the special issue related to Modelling the Deformation, Recrystallization and Microstructure-Related Properties in Metals, we presented a wide spectrum of articles dealing with modelling of microstructural aspects involved in deformation and recrystallization as well as simulation of microstructure-based and texture-based properties in various metals. The latest advances in the theoretical interpretation of mesoscopic transformations based on experimental observations were partially discussed in the current special issue. The studies dealing with the modelling of structure-property relationships are likewise analyzed in

• Author : Charles P. Blankenship
• Publisher : Unknown
• Release : 30 May 1971

• Author : Julia Ivanisenko,Andrea Bachmaier,Thierry Grosdidier
• Publisher : Unknown
• Release : 30 May 2023

Severe plastic deformation (SPD) is a very attractive research field for metallic materials because it provides new possibilities for manufacturing nanostructured materials in large quantities and allows microstructural design on different hierarchical levels. The papers included in this issue address the following topics: novel SPD processes as well as recent advancements in established processing methods, microstructure evolution and grain refinement in single- and multi-phase alloys as well as composites, strategies to enhance the microstructure stability at elevated temperatures, mechanically driven

• Author : Eric J. Palmiere,Mahdi Mahfouf,Christophe Pinna
• Publisher : Unknown
• Release : 30 May 2023

• Author : Hugh J. McQueen,Stefano Spigarelli,Michael E. Kassner,Enrico Evangelista
• Publisher : CRC Press
• Release : 28 September 2011

A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental

• Author : Alan Tomsett
• Publisher : Springer Nature
• Release : 28 January 2020

The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2020 collection includes papers from the following symposia: • Alumina and Bauxite• Aluminum Alloys, Processing and Characterization• Aluminum Reduction Technology• Cast Shop Technology• Cast Shop Technology: Recycling and Sustainability Joint Session• Electrode Technology for Aluminum Production