The Use of Electrochemical Scanning Tunnelling Microscopy EC STM in Corrosion Analysis

• Author : R Lindstrom,V Maurice,L Klein,P. Marcus
• Publisher : Woodhead Publishing
• Release : 30 November 2006

The European Federation of Corrosion’s Working Party on Surface Science and the Mechanisms of Corrosion and Protection (EFC WP6) has defined, as one of its objectives, the development of a reference material and reference guidelines for the application of electrochemical scanning tunnelling microscopy (EC-STM) in corrosion science. The use of EC-STM to study the relationship between surface structure and surface reactivity in situ on electrodes in contact with an electrolyte is of major importance in corrosion research. This report

• Author : Igual A. Munoz,S. Mischler
• Publisher : CRC Press
• Release : 25 November 2020

This special issue of Corrosion Engineering Science and Technology is dedicated to the study of corrosion of objects from historical sites. The issue contains contributions from the 2009 EUROCORR session on Corrosion of Archaeological and Heritage Artefacts organised by the European Federation of Corrosion's working party and commissioned articles on other key issues. The objective is to give the reader a broad understanding of corrosion of ancient materials, for the most part metal but also glass. Articles shed light on a

• Author : Jean-Pierre Celis
• Publisher : Routledge
• Release : 05 July 2017

This first edition of Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation: A Handbook treats in a clear, concise, and practical manner an important material degradation and protection matter. It is designed as a handbook and provides a well structured approach of the basics needed to investigate the tribocorrosion behavior of passivating materials, and to conduct in a correct way a laboratory investigation on it. It provides answers on practical and theoretical approaches of tribocorrosion phenomena to engineers

• Author : R-W Bosch,D Féron,J-P Celis
• Publisher : Elsevier
• Release : 30 April 2007

There has long been a need for effective methods of measuring corrosion within light water nuclear reactors. This important volume discusses key issues surrounding the development of high temperature reference electrodes and other electrochemical techniques. The book is divided into three parts with part one reviewing the latest developments in the use of reference electrode technology in both pressurised water and boiling water reactors. Parts two and three cover different types of corrosion and tribocorrosion and ways they can be

• Author : R Oltra,V Maurice,R Akid,P. Marcus
• Publisher : Elsevier
• Release : 23 January 2014

The effective investigation of corrosion requires the use of methods that can probe material surfaces at the atomic or molecular level and can be used in situ. This important collection reviews the range of techniques available and how they can be used to analyse different types of corrosion. A number of chapters discuss the use of scanning probe microscopy techniques such as electrochemical scanning tunnelling microscopy and atomic force microscopy (EC-STM and EC-AFM). Other chapters analyse local electrochemical techniques such

• Author : R Myrdal
• Publisher : Woodhead Publishing
• Release : 23 January 2014

Using reference electrodes to monitor the electrochemical potential of steel reinforcement in concrete is a well established technique for assessing the severity of corrosion and for controlling cathodic protection systems. This report gives a state-of-the-art overview of the electrochemical and physical characteristics and performance of embeddable reference electrodes for concrete, and the method used for installing them. The report first reviews electrochemical potential and reference electrodes in general. It then assesses the different types of reference electrodes for concrete. Finally,

• Author : Damien Feron,Roger W Staehle
• Publisher : Woodhead Publishing
• Release : 30 January 2016

Stress Corrosion Cracking of Nickel Based Alloys in Water-Cooled Nuclear Reactors: The Coriou Effect presents the latest information on brittle failure of metals in corrosive chemical environments under the influence of tensile stresses. Nickel alloys are more resistant to SCC as well as high temperatures and have been widely used in more challenging environments such as nuclear power plants. However, these alloys can suffer SCC under certain conditions, resulting in component failure. A key figure in understanding the mechanisms of

• Author : M Schütze,M Malessa
• Publisher : Elsevier
• Release : 23 January 2014

The thermal cyclic oxidation test has become one of the most widely accepted ways of measuring high temperature corrosion. There has long been a need for an agreed code of practice with standardised methods and procedures to ensure both the comparability and reliability of the results obtained. Based on an EU project, ‘Cyclic oxidation testing – development of a code of practice for the characterisation of high temperature materials performance’ (COTEST), this volume provides the essential background to an appropriate code

• Author : S Winnik
• Publisher : Woodhead Publishing
• Release : 26 November 2015

Corrosion-under-insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. In the first edition of this book published in 2008, the EFC Working Parties WP13

• Author : J Harston,F Ropital
• Publisher : Elsevier
• Release : 18 April 2007

The corrosion of carbon steels in amine units used for gas treatment in refining operations is a major problem for the petrochemical industry. Maximising amine unit reliability, together with improving throughput, circulation and treatment capacity, requires more effective ways of measuring and predicting corrosion rates. However, there has been a lack of data on corrosion. This valuable report helps to remedy this lack of information by summarising findings from over 30 plants. It covers such amine types as methyl diethanolamine (MDEA),

• Author : Luciano Lazzari
• Publisher : Woodhead Publishing
• Release : 28 July 2017

Engineering Tools for Corrosion: Design and Diagnosis proposes models and equations derived from theory. It includes discussions of the estimation of main corrosion parameters for corrosion rate, electrochemical constraints, thresholds limits and initiation time. The algorithms proposed are the conjugation of theory and engineering practice resulting from research and professional activities carried out by the author for almost four decades. Presents a rational approach to the corrosion prediction and evaluation dilemma Illustrates new models and algorithms for quantitative estimation of

• Author : Gino De Landtsheer
• Publisher : Woodhead Publishing
• Release : 22 August 2020

Corrosion Under Insulation (CUI) Guidelines: Technical Guide for Managing CUI, Third Edition, Volume 55 builds upon the success of the first two editions to provide a fully up-to-date, practical source of information on how to monitor and manage insulated systems. In the first edition of this book published in 2008, the EFC Working Parties WP13 and WP15 engaged together to provide guidelines on managing CUI with contributions from a number of European refining, petrochemical, and offshore companies. The guidelines were intended for

• Author : Stefan Ritter,Anders Molander
• Publisher : Routledge
• Release : 20 September 2017

Corrosion remains one of the key issues affecting the performance and availability of nuclear power plants. Therefore, reliable in-plant corrosion monitoring methods are essential both for the future operation of existing plants and to ensure the safety of future nuclear waste disposal systems. In two parts, this book was stimulated by a workshop organised by EFC Working Party 4 on Nuclear Corrosion and the European Cooperative Group on Corrosion Monitoring of Nuclear Materials (EGC-COMON). The first part deals mainly with research

• Author : P Dillmann,G Beranger,P Piccardo,H Matthiessen
• Publisher : Elsevier
• Release : 23 January 2014

Understanding long term corrosion processes is critical in many areas, including archaeology and conservation. This important book reviews key themes such as the processes underlying corrosion over long periods, how corrosion rates can be measured and materials conserved. After an overview of the study and conservation of metal archaeological artefacts, a group of chapters reviews long term corrosion in metals such as steel, iron and bronze. Other chapters review the impact of environmental factors on corrosion rates. The book also

• Author : P Dillmann,D Watkinson,E Angelini,A Adriaens
• Publisher : Elsevier
• Release : 31 July 2013

The conservation of metallic archaeological and historic artefacts is a major challenge whether they are ancient bronzes or relics of our more recent industrial past. Based on the work of Working Party 21 Corrosion of Archaeological and Historical Artefacts within the European Federation of Corrosion (EFC), this important book summarises key recent research on analytical techniques, understanding corrosion processes and preventing the corrosion of cultural heritage metallic artefacts. After an introductory part on some of the key issues in this area,