The Inclusion Based Boundary Element Method iBEM

• Author : Huiming Yin,Gan Song,Liangliang Zhang,Chunlin Wu
• Publisher : Academic Press
• Release : 01 May 2022

The Inclusion-Based Boundary Element Method (iBEM) is an innovative numerical method for the study of the multi-physical and mechanical behaviour of composite materials, linear elasticity, potential flow or Stokes fluid dynamics. It combines the basic ideas of Eshelby’s Equivalent Inclusion Method (EIM) in classic micromechanics and the Boundary Element Method (BEM) in computational mechanics. The book starts by explaining the application and extension of the EIM from elastic problems to the Stokes fluid, and potential flow problems for a

• Author : Chunlin Wu
• Publisher : Unknown
• Release : 19 August 2022

The combination of shape functions and domain integrals of polygonal / polyhedral subdomain enables its application to arbitrary shaped particles. It serves as a powerful tool to conduct virtual experiments for composite materials with various geometry and investigate the effective moduli under uni-axial load of samples with large number of particles or under the periodic boundary condition. In the future, the iBEM will be implemented for time independent and dependent nonlinear behavior of composites, such as elastoplastic, viscoelastic, and dynamic elastic

• Author : X. W. Gao,A. H-D. Cheng,C. A. Brebbia
• Publisher : WIT Press
• Release : 11 December 2013

The Conference on Boundary Elements and Mesh Reduction Methods (BEM/MRM) is recognised as the international forum for the latest advances in these techniques and their applications in science and engineering. Launched in 1978 the Conference continues to attract original contributions and has become the forum for their rapid dissemination throughout the international scientific community. Practically all new boundary element ideas have first appeared in the proceedings of these meetings.

• Author : Yijun Liu
• Publisher : Cambridge University Press
• Release : 24 August 2009

First book on the fast multipole BEM, bringing together classical theory in BEM formulations and the fast multipole method.

• Author : T.D. Papthanasiou,Andre Benard
• Publisher : Woodhead Publishing
• Release : 20 October 2021

The purpose of aligning short fibers in a fiber-reinforced material is to improve the mechanical properties of the resulting composite. Aligning the fibers, generally in a preferred direction, allows them to contribute as much as possible to reinforcing the material. The first edition of this book detailed, in a single volume, the science, processing, applications, characterization and properties of composite materials reinforced with short fibers that have been orientated in a preferred direction by flows arising during processing. The technology

• Author : Huiming Yin,Yingtao Zhao
• Publisher : CRC Press
• Release : 27 January 2016

Presents Concepts That Can Be Used in Design, Processing, Testing, and Control of Composite Materials Introduction to the Micromechanics of Composite Materials weaves together the basic concepts, mathematical fundamentals, and formulations of micromechanics into a systemic approach for understanding and modeling the effective material behavior of composite materials. As various emerging composite materials have been increasingly used in civil, mechanical, biomedical, and materials engineering, this textbook provides students with a fundamental understanding of the mechanical behavior of composite materials and

• Author : Q. Du,Mana Tanaka
• Publisher : Elsevier
• Release : 23 May 2014

Significant developments in the boundary element method during the last two decades have made it a powerful alternative to the domain-type numerical methods of solution such as the finite element method. The advances made in the BEM are more or less due to the innovation of efficient computational techniques by introducing boundary elements for discretization of the boundary integral equations resulting from the so-called direct formulation. BEM has therefore become an efficient tool for optimal design and other inverse problems.

• Author : M. H. Aliabadi,P. H. Wen
• Publisher : World Scientific
• Release : 19 August 2022

The boundary element method (BEM), also known as the boundary integral equation method (BIEM), is a modern numerical technique. It is an established alternative to traditional computational methods of engineering analysis. This book provides a comprehensive account of the method and its application to problems in engineering and science.

• Author : Dieter Radaj,Michael Vormwald
• Publisher : Springer Science & Business Media
• Release : 13 May 2013

In five chapters, this volume presents recent developments in fatigue assessment. In the first chapter, a generalized Neuber concept of fictitious notch rounding is presented where the microstructural support factors depend on the notch opening angle besides the loading mode. The second chapter specifies the notch stress factor including the strain energy density and J-integral concept while the SED approach is applied to common fillet welded joints and to thin-sheet lap welded joints in the third chapter. The forth chapter

• Author : A. B. Templeman
• Publisher : CRC Press
• Release : 19 August 1991

• Author : National Research Council,Naval Surface Warfare Center, Carderock Division,Office of Naval Research,Division on Engineering and Physical Sciences,Commission on Physical Sciences, Mathematics, and Applications,Naval Studies Board
• Publisher : National Academies Press
• Release : 02 February 2000

The Twenty-Second Symposium on Naval Hydrodynamics was held in Washington, D.C., from August 9-14, 1998. It coincided with the 100th anniversary of the David Taylor Model Basin. This international symposium was organized jointly by the Office of Naval Research (Mechanics and Energy Conversion S&T Division), the National Research Council (Naval Studies Board), and the Naval Surface Warfare Center, Carderock Division (David Taylor Model Basin). This biennial symposium promotes the technical exchange of naval research developments of common interest to

• Author : A. Ali,C. Rajakumar
• Publisher : CRC Press
• Release : 15 August 2004

The Boundary Element Method, or BEM, is a powerful numerical analysis tool with particular advantages over other analytical methods. With research in this area increasing rapidly and more uses for the method appearing, this timely book provides a full chronological review of all techniques that have been proposed so far, covering not only the fundamentals of the BEM but also a wealth of information on related computational analysis techniques and formulations, and their applications in engineering, physics and mathematics. An

• Author : I. Benedetti A. Milazzo M.H. Aliabadi
• Publisher : Engineering Conferences
• Release : 01 July 2019

Proceedings of the 20th International Conference. The Conferences on Boundary Element and Meshless Techniques are devoted to fostering the continued involvement of the research community in identifying new problem areas, mathematical procedures, innovative applications, and novel solution techniques as applied to the Boundary Element Method and Meshless Techniques. Previous conferences devoted to were held in London, UK (1999), New Jersey, USA (2001), Beijing, China (2002), Granada, Spain (2003), Lisbon, Portugal (2004), Montreal, Canada (2005), Paris, France (2006), Naples, Italy (2007), Seville, Spain (2008), Athens, Greece (2009), Berlin, Germany (2010), Brasilia, Brazil (2011),

• Author : Balkrishna S. Annigeri,Kadin Tseng
• Publisher : Springer Science & Business Media
• Release : 06 December 2012

The Boundary Element Method (BEM) has become established as an effective tool for the solutions of problems in engineering science. The salient features of the BEM have been well documented in the open literature and therefore will not be elaborated here. The BEM research has progressed rapidly, especially in the past decade and continues to evolve worldwide. This Symposium was organized to provide an international forum for presentation of current research in BEM for linear and nonlinear problems in solid

• Author : Balgaisha Mukanova,Igor Modin
• Publisher : Springer
• Release : 12 February 2018

This volume is devoted to the application of the integral equations method (IEM) and boundary elements method (BEM) to problems involving the sounding of geological media using direct current (DC). Adaptive mesh generation algorithms and numerical methods for solving a system of integral equations are discussed. Integral equations for the media, which contains piecewise linear contact boundaries, immersed local inclusions, and subsurface relief, are derived and solved numerically. Both 2.5D and 3D models with ground surface relief are considered. For 2