Handbook of Materials Failure Analysis with Case Studies from the Oil and Gas Industry

• Author : Abdel Salam Hamdy Makhlouf,Mahmood Aliofkhazraei
• Publisher : Butterworth-Heinemann
• Release : 01 September 2015

Handbook of Materials Failure Analysis: With Case Studies from the Oil and Gas Industry provides an updated understanding on why materials fail in specific situations, a vital element in developing and engineering new alternatives. This handbook covers analysis of materials failure in the oil and gas industry, where a single failed pipe can result in devastating consequences for people, wildlife, the environment, and the economy of a region. The book combines introductory sections on failure analysis with numerous real world

• Author : Abdel Salam Hamdy Makhlouf,Mahmood Aliofkhazraei
• Publisher : Butterworth-Heinemann
• Release : 01 September 2015

Handbook of Materials Failure Analysis: With Case Studies from the Aerospace and Automotive Industries provides a thorough understanding of the reasons materials fail in certain situations, covering important scenarios, including material defects, mechanical failure as a result of improper design, corrosion, surface fracture, and other environmental causes. The book begins with a general overview of materials failure analysis and its importance, and then logically proceeds from a discussion of the failure analysis process, types of failure analysis, and specific tools

• Author : Anonim
• Publisher : Unknown
• Release : 27 March 2023

• Author : Abdel Salam Hamdy Makhlouf,Mahmood Aliofkhazraei
• Publisher : Butterworth-Heinemann
• Release : 07 September 2015

Handbook of Materials Failure Analysis: With Case Studies from the Chemicals, Concrete and Power Industries provides an in-depth examination of materials failure in specific situations, a vital component in both developing and engineering new solutions. This handbook covers analysis of materials failure in the chemical, power, and structures arenas, where the failure of a single component can result in devastating consequences and costs. Material defects, mechanical failure as a result of improper design, corrosion, surface fracture, and other failure mechanisms

• Author : Abdel Salam Hamdy Makhlouf,Mahmood Aliofkhazraei
• Publisher : Butterworth-Heinemann
• Release : 27 April 2018

Handbook of Materials Failure Analysis: With Case Studies from the Construction Industry provides a thorough understanding of the reasons materials fail in certain situations, covering important scenarios including material defects, mechanical failure due to various causes, and improper material selection and/or corrosive environment. The book begins with a general overview of materials failure analysis and its importance, and then logically proceeds from a discussion of the failure analysis process, types of failure analysis, and specific tools and techniques, to

• Author : Karan Sotoodeh
• Publisher : Gulf Professional Publishing
• Release : 07 June 2022

Case Studies of Material Corrosion Prevention for Oil and Gas Valves delivers a critical reference for engineers and corrosion researchers. Packed with nearly 30 real-world case studies, this reference gives engineers standardized knowledge on how to maintain, select and prevent typical corrosion problems in a variety of oil and gas settings. Subsea, offshore, refineries and processing plants are all included, covering a variety of challenges such as chloride stress cracking, how to use Teflon powder to prevent cross contamination, and carbon

• Author : Karan Sotoodeh
• Publisher : CRC Press
• Release : 14 September 2022

This book looks at the applications of coating in piping, valves and actuators in the offshore oil and gas industry. Providing a key guide for professionals and students alike, it highlights specific coating standards within the industry, including ISO, NORSOK, SSPC and NACE. In the corrosive environment of a seawater setting, coatings to protect pipes, valves and actuators are essential. This book provides both the theory behind these coatings and practical applications, including case studies from multinational companies. It covers

• Author : Sergey Kovalev,Valery Tarassov,Vaclav Snasel,Andrey Sukhanov
• Publisher : Springer Nature
• Release : 22 June 2020

This book gathers papers presented in the main track of IITI 2019, the Fourth International Scientific Conference on Intelligent Information Technologies for Industry, held in Ostrava–Prague, Czech Republic on December 2–7, 2019. The conference was jointly organized by Rostov State Transport University (Russia) and VŠB – Technical University of Ostrava (Czech Republic) with the participation of the Russian Association for Artificial Intelligence (RAAI). IITI 2019 was devoted to practical models and industrial applications of intelligent information systems. Though chiefly intended to promote the

• Author : Faris Yılmaz
• Publisher : BoD – Books on Demand
• Release : 27 September 2017

Polyurethanes are formed by reacting a polyol (an alcohol with more than two reactive hydroxyl groups per molecule) with a diisocyanate or a polymeric isocyanate in the presence of suitable catalysts and additives. Because a variety of diisocyanates and a wide range of polyols can be used to produce polyurethane, a broad spectrum of materials can be produced to meet the needs of specific applications. During World War II, a widespread use of polyurethanes was first seen, when they were

• Author : Hector Jaramillo S.,Julian Arnaldo Avila,Can Chen
• Publisher : BoD – Books on Demand
• Release : 25 March 2020

In materials, their strength is the ability to bear an applied load before their failure. In this direction, the Strength of Materials studies the stresses and deformations that happen in materials as an outcome of loads acting on them. The book contains eleven peer-reviewed chapters organized into two sections. Section 1 is focused on the strength of metals and composites materials, in other words on traditional materials used in engineering projects. Section 2 contains chapters on sustainable materials or non-conventional materials. We

• Author : Mojtaba Mahmoodian
• Publisher : Gulf Professional Publishing
• Release : 13 June 2018

Reliability and Maintainability of In-Service Pipelines helps engineers understand the best structural analysis methods and more accurately predict the life of their pipeline assets. Expanded to cover real case studies from oil and gas, sewer and water pipes, this reference also explains inline inspection and how the practice influences reliability analysis, along with various reliability models beyond the well-known Monte Carlo method. Encompassing both numerical and analytical methods in structural reliability analysis, this book gives engineers a stronger point of

• Author : Abdel Salam Hamdy Makhlouf,Nedal Yusuf Abu-Thabit
• Publisher : Elsevier
• Release : 25 October 2019

Advances In Smart Coatings And Thin Films For Future Industrial and Biomedical Engineering Applications discusses in detail, the recent trends in designing, fabricating and manufacturing of smart coatings and thin films for future high-tech. industrial applications related to transportation, aerospace and biomedical engineering. Chapters cover fundamental aspects and diverse approaches used to fabricate smart self-healing anti-corrosion coatings, shape-memory coatings, polymeric and nano-bio-ceramic cotings, bio-inspired and stimuli-responsive coatings for smart surfaces with antibacterial activkity and controlled wettability, and electrically conductive coatings

• Author : Neha Srivastava,Manish Srivastava,P. K. Mishra,Vijai Kumar Gupta
• Publisher : John Wiley & Sons
• Release : 09 November 2020

An authoritative summary of the quest for an environmentally sustainable synthesis process of nanomaterials and their application for environmental sustainability Green Synthesis of Nanomaterials for Bioenergy Applications is an important guide that provides information on the fabrication of nanomaterial and the application of low cost, green methods. The book also explores the impact on various existing bioenergy approaches. Throughout the book, the contributors—noted experts on the topic—offer a reliable summary of the quest for an environmentally sustainable synthesis

• Author : Santanu Banerjee,Reza Barati,Shirish Patil
• Publisher : Springer
• Release : 11 March 2019

This edited volume is based on the best papers accepted for presentation during the 1st Springer Conference of the Arabian Journal of Geosciences (CAJG-1), Tunisia 2018. The book is of interest to all researchers in the fields of petroleum engineering, reservoir engineering and petroleum geochemistry. The MENA region accounts for more than 50 percent of the world's hydrocarbon reserves. Despite being the largest oil and gas producer of the world, the MENA countries face routine problems regarding petroleum engineering, reservoir modelling and

• Author : Carlos Guedes Soares,T.A. Santos
• Publisher : CRC Press
• Release : 01 December 2016

Maritime Technology and Engineering 3 is a collection of papers presented at the 3rd International Conference on Maritime Technology and Engineering (MARTECH 2016, Lisbon, Portugal, 4-6 July 2016). The MARTECH Conferences series evolved from biannual national conferences in Portugal, thus reflecting the internationalization of the maritime sector. The keynote lectures and the papers, making up nearly 150 contributions, came from an international group of authors focused on different subjects in a variety of fields: Maritime Transportation, Energy Efficiency, Ships in Ports, Ship Hydrodynamics, Ship