Fundamentals of Evaluation and Diagnostics of Welded Structures

• Author : A Nedoseka
• Publisher : Elsevier
• Release : 31 August 2012

Fundamentals of Evaluation and Diagnostics of Welded Structures provides an essential guide to the key principles and problems involved in the analysis of welded structures. Chapter one discusses design issues, key equations and calculations, and the effects of varied heat sources in relation to the temperature field in welding. Chapter two goes on to explore welding stresses and strains. Fracture mechanics and the load-carrying capacity of welded structures are the focus of chapter three. Chapter four considers diagnostics and prediction

• Author : A. Nedoseka
• Publisher : Woodhead Publishing Limited
• Release : 03 July 2022

Professor Nedoseka presents an essential guide to the key principles and problems involved in the analysis of welded structures. In the introductory chapter, he discusses design issues, key equations and calculations, and the effects of varied heat sources in relation to the temperature field in welding. Subsequent chapters explore welding stresses and strains and fracture mechanics, the load carrying capacity of welded structures, diagnostics and prediction of the residual life of welded structures and acoustic emission techniques for the analysis

• Author : Philippa L Moore,Geoff Booth
• Publisher : Elsevier
• Release : 21 November 2014

The Welding Engineer's Guide to Fracture and Fatigue provides an essential introduction to fracture and fatigue and the assessment of these failure modes, through to the level of knowledge that would be expected of a qualified welding engineer. Part one covers the basic principles of weld fracture and fatigue. It begins with a review of the design of engineered structures, provides descriptions of typical welding defects and how these defects behave in structures undergoing static and cyclical loading, and explains

• Author : A Chrysanthou,X Sun
• Publisher : Woodhead Publishing
• Release : 14 February 2014

Due to its speed, low energy requirements, and the fact that it does not require a pre-drilled hole, the technique of self-piercing riveting (SPR) has been increasingly adopted by many industries as a high-speed mechanical fastening technique for the joining of sheet material components. Self-piercing riveting comprehensively reviews the process, equipment, and corrosion behaviour of self-piercing riveting, and also describes the process of evaluation and modelling of strength of self-piercing riveted joints, quality control methods and non-destructive testing. Part one

• Author : Mahadev Shome,Muralidhar Tumuluru
• Publisher : Elsevier
• Release : 25 February 2015

Welding and Joining of Advanced High Strength Steels (AHSS): The Automotive Industry discusses the ways advanced high strength steels (AHSS) are key to weight reduction in sectors such as automotive engineering. It includes a discussion on how welding can alter the microstructure in the heat affected zone, producing either excessive hardening or softening, and how these local changes create potential weaknesses that can lead to failure. This text reviews the range of welding and other joining technologies for AHSS and

• Author : Tom Gray,D. Camilleri,N. McPherson
• Publisher : Elsevier
• Release : 15 February 2014

The intense temperature fields caused by heat sources in welding frequently lead to distortions and residual stresses in the finished product. Welding distortion is a particular problem in fabricating thin plate structures such as ships. Based on pioneering research by the authors, Control of Welding Distortion in Thin-Plate Fabrication reviews distortion test results from trials and shows how outcomes can be modeled computationally. The book provides readers with an understanding of distortion influences and the means to develop distortion-reducing strategies.

• Author : Horst Czichos
• Publisher : Springer Science & Business Media
• Release : 11 January 2013

This book presents concepts, methods and techniques to examine symptoms of faults and failures of structures, systems and components and to monitor functional performance and structural integrity. The book is organized in five parts. Part A introduces the scope and application of technical diagnostics and gives a comprehensive overview of the physics of failure. Part B presents all relevant methods and techniques for diagnostics and monitoring: from stress, strain, vibration analysis, nondestructive evaluation, thermography and industrial radiology to computed tomography

• Author : Anonim
• Publisher : Unknown
• Release : 03 July 1988

• Author : R S Sharpe,J West,D S Dean
• Publisher : Butterworth-Heinemann
• Release : 28 March 2017

Quality Technology Handbook, Fourth Edition offers a wide discussion on technology and its related subtopics. After giving some information on its background, content, and authors, the book then informs the readers about the quality problem check-list and enumerates the questions one has to ask to ensure that a problem will be solved. This part is followed by a discussion on non-destructive testing (NDT) and the several committees formed for it, among which are the British National Committee and the Harwell

• Author : Anonim
• Publisher : Unknown
• Release : 03 July 1992

• Author : Thomas J. Lienert
• Publisher : ASM International(OH)
• Release : 03 July 2022

• Author : Anonim
• Publisher : Unknown
• Release : 03 July 1994

• Author : Douglas Adams
• Publisher : John Wiley & Sons
• Release : 13 June 2007

The first complete introduction to health monitoring, encapsulating both technical information and practical case studies spanning the breadth of the subject. Written by a highly-respected figure in structural health monitoring, this book provides readers with the technical skills and practical understanding required to solve new problems encountered in the emerging field of health monitoring. The book presents a suite of methods and applications in loads identification (usage monitoring), in-situ damage identification (diagnostics), and damage and performance prediction (prognostics). Concepts in

• Author : G. J. Burrer
• Publisher : Society of Photo Optical
• Release : 03 July 1984

• Author : Anonim
• Publisher : Unknown
• Release : 03 July 1995