Fatigue and Tribological Properties of Plastics and Elastomers

• Author : Laurence W. McKeen
• Publisher : William Andrew
• Release : 31 March 2016

Part of a series of data-rich handbooks within the Plastics Design Library, Fatigue and Tribological Properties of Plastics and Elastomers provides a comprehensive collection of graphical multipoint data and tabular data covering the fatigue and tribological performance of plastics. The handbook is structured by grouping together plastics of similar polymer types into ten chapters. Each of these chapters is split into two sections: Fatigue Properties and Tribological Properties, and together they provide a compendium of several hundred graphs and charts,

• Author : PDL Staff
• Publisher : William Andrew
• Release : 22 October 2013

For all practical purposes, the useful life of a plastic component is equal to its fatigue life under conditions of cyclic loading such as those that occur in vibration. Equally important to materials engineers and designers are abrasion, friction and wearùtribological properties. Over 80 generic families are covered including thermoplastics, thermosets, thermoplastic elastomers and rubbers. Neat resins, blends and alloys, plastics with various combinations of fillers, additives and more are covered. Also covers plastics mated to plastics and metals.

• Author : Plastics Design Library
• Publisher : CRC Press
• Release : 01 October 1994

This handbook is a database reference covering fatigue behavior and friction and wear characteristics of 106 plastics and elastomers. Data presented details the differences in behavior between generic families of plastic and rubber materials. Also covered are differences within the same generic family due to factors such as temperature, test frequency, and mating surface details (in the case of tribological properties) or material characteristics, such as sample preparation and material composition. Also covered are the tribological (friction and wear) properties of

• Author : Laurence W. McKeen
• Publisher : Unknown
• Release : 07 June 2023

• Author : Behraad Bahreyni
• Publisher : William Andrew
• Release : 20 October 2008

This book discusses the main issues of fabrication and design, and applications of micromachined resonant devices, including techniques commonly used for processing the output signal of resonant micro-electro-mechanical systems (MEMS). Concepts of resonance are introduced, with an overview of fabrication techniques for micromachined devices – important to understand as design options will depend on how the device will be fabricated. Also explained: excitation and signal detection methods; an analytic model of device behavior (a valuable design tool); numerical simulation techniques; issues

• Author : Laurence W. McKeen
• Publisher : William Andrew
• Release : 25 April 2012

Now in its 3e, Film Properties of Plastics and Elastomers, has been extensively revised. This is the only data handbook available on the engineering properties of commercial polymeric films. It details many physical, mechanical, optical, electrical, and permeation properties within the context of specific test parameters, providing a ready reference for comparing materials in the same family as well as materials in different families. Data is presented on the characteristics of 47 major plastic and elastomer packaging materials. New to this

• Author : Laurence W. McKeen
• Publisher : William Andrew
• Release : 22 February 2018

The Effect of Sterilization Methods on Plastics and Elastomers, Fourth Edition brings together a wide range of essential data on the sterilization of plastics and elastomers, thus enabling engineers to make optimal material choices and design decisions. The data tables in this book enable engineers and scientists to select the right materials and sterilization method for a given product or application. The book is a unique and essential reference for anybody working with plastic materials that are likely to be

• Author : Laurence W. McKeen
• Publisher : William Andrew
• Release : 22 March 2019

The Effect of UV Light and Weather on Plastics and Elastomers, Fourth Edition, provides critical data on the effect of UV light and weathering on plastics and elastomers, enabling engineers, designers and R&D professionals to select the right materials when developing plastics products for a range of industries and applications. This information will also support academic researchers and scientists in developing polymeric materials for advanced applications. Provides vital data on the effects of weather and UV light exposure on

• Author : Bonnie A. Osif
• Publisher : CRC Press
• Release : 23 August 2006

The field of engineering is becoming increasingly interdisciplinary, and there is an ever-growing need for engineers to investigate engineering and scientific resources outside their own area of expertise. However, studies have shown that quality information-finding skills often tend to be lacking in the engineering profession. Using the Engineerin

• Author : Laurence W. McKeen
• Publisher : William Andrew
• Release : 20 August 2020

The Effect of Radiation on Properties of Polymers examines the effects of radiation on plastics and elastomers. Polymers are required in products or parts for a range of cutting-edge applications that are exposed to radiation, in areas such as space, medicine, and radiation processing. This book focuses on the effects of radiation exposure within that environment, providing in-depth data coverage organized by category of polymer. Aspects such as radiation impact on mechanical and thermal properties, including glass transition and heat

• Author : Sultan Al-Salem
• Publisher : William Andrew
• Release : 05 November 2018

Plastics to Energy: Fuel, Chemicals, and Sustainability Implications covers important trends in the science and technology of polymer recovery, such as the thermo-chemical treatment of plastics, the impact of environmental degradation on mechanical recycling, incineration and thermal unit design, and new options in biodegradable plastics. The book also introduces product development opportunities from waste materials and discusses the main processes and pathways of the conversion of polymeric materials to energy, fuel and chemicals. A particular focus is placed on industrial

• Author : Anshuman Shrivastava
• Publisher : William Andrew
• Release : 15 May 2018

Introduction to Plastics Engineering provides a single reference covering the basics of polymer and plastics materials, and their properties, design, processing and applications in a practical way. The book discusses materials engineering through properties formulation, combining part design and processing to produce final products. This book will be a beneficial guide to materials engineers developing new formulations, processing engineers producing those formulations, and design and product engineers seeking to understand the materials and methods for developing new applications. The book

• Author : Laurence W. McKeen
• Publisher : William Andrew
• Release : 11 October 2015

Fluorinated Coatings and Finishes Handbook: The Definitive User's Guide, Second Edition, addresses important, frequently posed questions by end-user design engineers, coaters, and coatings suppliers on fluorinated coatings and finishes, thus enabling them to achieve superior product qualities and shorter product and process development times. The book provides broad coverage of these fluorinated polymer coatings, including the best known PTFE, polytetrafluoroethylene, first trademarked as Teflon® and ePTFE (GoreTex®). Their inherent qualities of low surface tension, non-stick, low friction, high melting point,

• Author : Michael Niaounakis
• Publisher : William Andrew
• Release : 04 December 2019

Recycling of Flexible Plastic Packaging presents thorough and detailed information on the management and recycling of flexible plastic packaging, focusing on the latest actual/potential methods and techniques and offering actionable solutions that minimize waste and increase product efficiency and sustainability. Sections cover flexible plastic packaging and its benefits, applications and challenges. This is followed by in-depth coverage of the materials, types and forms of flexible packaging. Other key discussions cover collection and pre-treatment, volume reduction, separation from other materials,

• Author : Michel Biron
• Publisher : William Andrew
• Release : 06 June 2018

Thermoplastics and Thermoplastic Composites, Third Edition bridges the technology and business aspects of thermoplastics, providing a guide designed to help engineers working in real-world industrial settings. The author explores the criteria for material selection, provides a detailed guide to each family of thermoplastics, and explains the various processing options for each material type. More than 30 families of thermoplastics are described with information on their advantages and drawbacks, special grades, prices, transformation processes, applications, thermal behavior, technological properties (tenacity, friction, dimensional