Combustion of Pulverised Coal in a Mixture of Oxygen and Recycled Flue Gas

• Author : Dobrin Toporov
• Publisher : Elsevier
• Release : 30 May 2014

Combustion of Pulverised Coal in a Mixture of Oxygen and Recycled Flue Gas focuses on a niche technology, combustion of coal in an oxygen rich environment, which is one approach to obtaining ‘clean coal,’ by making it easier to capture carbon that is released in the combustion process. Toporov’s book breaks ground on covering the key fundamentals of oxycoal technologies, which have not yet been covered in this depth. Combustion of Pulverised Coal in a Mixture of Oxygen and

• Author : Jinyue Yan
• Publisher : John Wiley & Sons
• Release : 22 June 2015

The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for

• Author : L Zheng
• Publisher : Elsevier
• Release : 26 February 2011

Oxy-fuel combustion is currently considered to be one of the major technologies for carbon dioxide (CO2) capture in power plants. The advantages of using oxygen (O2) instead of air for combustion include a CO2-enriched flue gas that is ready for sequestration following purification and low NOx emissions. This simple and elegant technology has attracted considerable attention since the late 1990s, rapidly developing from pilot-scale testing to industrial demonstration. Challenges remain, as O2 supply and CO2 capture create significant energy

• Author : John Gale,Yoichi Kaya
• Publisher : Elsevier
• Release : 05 August 2003

Climate change is an issue that is highly debated around the globe. This book brings together the papers that were presented at a conference dedicated to this issue, held in Kyoto in October 2002. Covering a broad range of areas, the topics presented will benefit both those working in the field of carbon dioxide recovery and sequestration, and those looking at the effects of non carbon dioxide greenhouse gases. An overview of the Research and Design technologies which aid in mitigating

• Author : Chuguang Zheng,Zhaohui Liu
• Publisher : Academic Press
• Release : 14 September 2017

Oxy-fuel Combustion: Fundamentals, Theory and Practice provides a comprehensive review of various aspects of oxy-fuel combustion technology, including its concept, fundamental theory, pilot practice, large-scale feasibility studies and related practical issues, such as the commissioning and operation of an oxy-fuel combustion plant. Oxy-fuel combustion, as the most practical large-scale carbon capture power generation technology, has attracted significant attention in the past two decades. As significant progress has been achieved in worldwide demonstration and the oxy-combustion concept confirmed by Schwartze Pump,

• Author : Haiying Qi,Bo Zhao
• Publisher : Springer Science & Business Media
• Release : 19 November 2012

Cleaner Combustion and Sustainable World is the proceedings of the 7th International Symposium on Coal Combustion which has a significant international influence. It concerns basic research on coal combustion and clean utilization, techniques and equipments of pulverized coal combustion, techniques and equipments of fluidized bed combustion, basic research and techniques of emission control, basic research and application techniques of carbon capture and storage (CCS), etc. Professor Haiying Qi and Bo Zhao both work at the Tsinghua University, China

• Author : R.P. Hesketh,Martin A. A. Abraham
• Publisher : Elsevier
• Release : 09 February 2000

This book defines environmental reaction engineering principles, including reactor design, for the development of processes that provide an environmental benefit. With regard to pollution prevention, the focus is primarily on new reaction and reactor technologies that minimize the production of undesirable side-products (pollutants), but the use of reaction engineering as a means of treating wastes that are produced through other means is also considered. First is a section on environmentally benign combustion. The three papers discuss methods of reducing the

• Author : David John Williams
• Publisher : CSIRO PUBLISHING
• Release : 25 March 2023

Contains 220 papers presented at the GHGT-5 held in August 2000.

• Author : Charles E. Baukal Jr.
• Publisher : CRC Press
• Release : 15 March 2013

Combustion technology has traditionally been dominated by air/fuel combustion. However, two developments have increased the significance of oxygen-enhanced combustion—new technologies that produce oxygen less expensively and the increased importance of environmental regulations. Advantages of oxygen-enhanced combustion include less pollutant emissions as well as increased energy efficiency and productivity. Oxygen-Enhanced Combustion, Second Edition compiles information about using oxygen to enhance industrial heating and melting processes. It integrates fundamental principles, applications, and equipment design in one volume, making it a

• Author : Seyed Ehsan Hosseini
• Publisher : Academic Press
• Release : 29 July 2022

Fundamentals of Low Emission Flameless Combustion and Its Applications is a comprehensive reference on the flameless combustion mode and its industrial applications, considering various types of fossil and alternative fuel. Several experimental and numerical accomplishments on the fundamentals of state-of-the-art flameless combustion is presented, working to clarify the environmentally friendly aspects of this combustion mode. Author Dr. Hosseini presents the latest progresses in the field and highlights the most important achievements since invention, including the fundamentals of thermodynamics, heat transfer

• Author : Hervé Baron
• Publisher : Editions TECHNIP
• Release : 25 March 2023

Each engineering task is described and illustrated with a sample document taken from a real project. --

• Author : Mariano Martín
• Publisher : Springer
• Release : 22 March 2016

Presenting a comprehensive analysis of the use of alternative sources of energy and technologies to produce fuels and power, this book describes the energy value chain from harvesting the raw material, (i.e solar, wind, biomass or shale gas) followed by analysis of the processing steps into power, fuels and/or chemicals and finally the distribution of the products. Featuring an examination of the techno-economic processes and integration opportunities which can add value to by-products or promote the use of

• Author : Mohammad Rasul
• Publisher : BoD – Books on Demand
• Release : 17 April 2013

Thermal power plants are one of the most important process industries for engineering professionals. Over the past decades, the power sector is facing a number of critical issues; however, the most fundamental challenge is meeting the growing power demand in sustainable and efficient ways. Practicing power plant engineers not only look after operation and maintenance of the plant, but, also look after range of activities including research and development, starting from power generation to environmental aspects of power plants. The

• Author : Fabrice Lecomte,Paul Broutin,Etienne Lebas
• Publisher : Editions TECHNIP
• Release : 25 March 2023

CO2 capture and geological storage (CCS) is now recognised as being one of the pathways that can be implemented to reduce CO2 emissions and fight against global warming. But where, how and at what price can CO2 be captured? This book attempts to provide the answers to these questions, reviewing the state of the art of the technologies required. It presents the three main pathways considered in which the CO2 capture technologies are expected to be implemented, respectively: the post-combustion

• Author : Ye Yuan
• Publisher : Springer
• Release : 15 February 2019

This book focuses on pulverized coal particle devolatilization, ignition, alkali metal release behavior, and burnout temperature using several novel optic diagnostic methods on a Hencken multi-flat flame burner. Firstly, it presents a novel multi-filter technique to detect the CH* signal during coal ignition, which can be used to characterize the volatile release and reaction process. It then offers observations on the prevalent transition from heterogeneous ignition to hetero-homogeneous ignition due to ambient temperature based on visible light signal diagnostics. By